To get the lowdown on best 10 inch miter saw blade, we’ve consulted top experts who has in-and-out knowledge about the 10 inch miter saw blade.

An increasingly popular option is a Freud LU87R010 10 inch miter saw blade, which comes with amazing features you’ve never heard before. More than 453 verified buyers have rated this product 4.6 star on Amazon. It is undoubtedly the best 10 inch miter saw blade available in the market today. However, if you don’t want to spend big on 10 inch miter saw blade, then you should absolutely go for Freud LU83R010 10 inch miter saw blade which comes with all the basic features one could expect in a 10 inch miter saw blade.

While you’ll find 10 inch miter saw blade that are less than $10, you’re far likelier to have problems with these models than somewhat more expensive 10 inch miter saw blade. Generally, a good 10 inch miter saw blade with desirable extra features will cost between $10 to $120.

If you are ready to choose a new 10 inch miter saw blade, check out our recommendations for the best 10 inch miter saw blade. But if you’d like to learn more about the various types of 10 inch miter saw blade available and how to choose the right one for you, read on.

So here is our list of The 10 Best 10 inch miter saw blade

1. Freud LU87R010 10 inch miter saw blade

Freud 10″ x 24T Thin Kerf Rip Blade (LU87R010)

By Freud

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD(tm) coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power.

  • LU87R010 Thin Kerf Rip Saw Blade
  • At a Glance:
  • Technical Specs:
  • Depth of Cut
  • Thin Kerf

2. Freud LU83R010 10 inch miter saw blade

Freud 10″ x 50T Thin Kerf Combination Blade (LU83R010)

By Freud

The ultimate combination blade is now available in a thin kerf design with Freud’s LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance.

  • LU83R010 Thin Kerf Combination Saw Blade
  • At a Glance:
  • Technical Specs:
  • Thin Kerf
  • Laser-Cut Anti-Vibration Slots

3. Freud LU88R010 10 inch miter saw blade

Freud 10″ x 60T Thin Kerf Fine Finish Crosscut Blade (LU88R010)

By Freud

This Perma-SHIELD(tm) coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power.

  • LU88R010 Thin Kerf Fine Finish Crosscut Saw Blade
  • At a Glance:
  • Technical Specs:
  • Depth of Cut
  • Thin Kerf

4. Freud LM72M010 10 inch miter saw blade

Freud 10″ x 24T Heavy-Duty Rip Blade (LM72M010)

By Freud

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a “glue line” precision cut.

  • LM72M010 Heavy-Duty Rip Saw Blade
  • At a Glance:
  • Technical Specs:
  • Depth of Cut
  • Extra Large, Flat Tooth Design

5. Freud LU84R011 10 inch miter saw blade

Freud 10″ x 50T Combination Blade (LU84R011)

By Freud

In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4″ plywood.

  • LU84R011 Combination Saw Blade with Perma-SHIELD
  • At a Glance:
  • Technical Specs:
  • Large Gullets
  • Laser-Cut Anti-Vibration Slots

6. Hitachi 115435 10 inch miter saw blade

Hitachi 115435 10″ 60T Fine Finish VPR Miter Saw Blade

By Hitachi

Hitachi premium vpr blades are laser-cut from high quality Japanese steel to maintain durability and cutting precision. These superior blades are ideal for dry wood applications such as ripping, cross cuts, and miter cuts.

  • Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades
  • An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth
  • This premium line of vpr blades is perfect for all cutting needs from framing and ripping to fine finish woodworking
  • Features include: industrial high performance micro grain tungsten carbide – micro grain structure provides extreme durability and longevity
  • Tri-metal shock resistant brazing – brazing the carbide tips allows the tips to withstand extreme impact for maximum durability

7. Irwin Tools 11270ZR 10 inch miter saw blade

IRWIN Tools Steel Table / Miter Circular Saw Blade, 10-Inch, 80 Tooth (11270ZR)

By Irwin Tools

Precision-ground teeth allow for smooth, accurate cuts. Fully hardened plate runs truer longer.

  • Heavy-gauge high-carbon steel for extended life
  • Features a 5/8-Inch Universal Arbor
  • 80 tooth count woodworking blades are best for ultra-smooth cross-cutting
  • IRWIN Tools Steel Table / Miter Circular Saw Blade, 10-Inch, 80 Tooth (11270ZR)

8. Irwin Tools 14070 10 inch miter saw blade

IRWIN Tools MARATHON Carbide Table/Miter Circular Blade, 10-Inch, 40T (14070)

By Irwin Tools

Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life. 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life.

  • For over a century, innovation has been the hallmark of IRWIN TOOLS. Beginning in 1885, with the development of the first IRWIN Auger Bit, and progressing with the introduction of Vise-Grip Locking Tools, SPEEDBOR Flat Bits, MARATHON Saw Blades, and QUICK-GRIP Bar Clamps, IRWIN has been at the forefront of the industry, creating superior tools for the professional tradesman.
  • IRWIN MARATHON miter and table carbide saw blades have redefined excellence to become the top choice for professional tradesmen with innovative expansion slots, construction-grade carbide teeth, and the accuracy that only precision-balanced blades can provide.
  • Professional tradesmen choose IRWIN saw blades to get their jobs done because IRWIN saw blades set the standard for jobsite productivity.
  • 5 expansion slots prevent warping for straight, accurate cuts over prolonged use.
  • Construction-grade micro-grain carbide teeth are diamond-ground for accurate, smooth cutting.

9. Overpeak 10 inch Circular Saw Blade, 80 Tooth ATB Finishing Saw Blades with 5/8-Inch Arbor, Laser-Cut Thin Kerf and Anti-rust Coating

Overpeak 10 inch Circular Saw Blade, 80 Tooth ATB Finishing Saw Blades with 5/8-Inch Arbor, Laser-Cut Thin Kerf and Anti-rust Coating

By Overpeak

About Overpeak: A History of Innovative Manufacturing Overpeak Tools CO. ,LTD is a manufacturer and marketer of superior diamond tools.

  • Product Specifications:
  • Features:
  • Use Guide:

10. Dewalt DW3218PT 10 inch miter saw blade

DEWALT DW3218PT 10-Inch 80 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish

By DEWALT

Thin kerf, . 098 , saw blade for for use with miter and table saws.

  • DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold.
  • In a commitment to build America, DEWALT, a leading manufacturer of high-quality professional power tools, is proud to expand its product offerings made in the USA using global materials to include more than 600 different cordless power tools, hand tools and accessories. DEWALT began production of its American-built cordless power tools in its 75,000-square-foot Charlotte Manufacturing Operations facility in early October of 2013, using global materials.
  • DEWALT cannot guarantee the tool you receive to be made in the USA, some retailers may have items that were built prior to October 2013. Only tools manufactured after October 2013 are made in the USA with global materials.

Hope this list of the best 10 inch miter saw blade will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.

Contact us

Joel Townsend
32 Rockefeller Plaza,
New York, NY 10112, United States
Tel: +1 (302) 261-7391
USA/Canada Toll-Free No.+1 (760) 614-0125
Email: contact@bittasset.com

Previous ArticleNext Article
Katherine Jonas
Katherine is an editor-in-chief at Bittasset. After getting graduated from Cornell University, she has worked with the brands like Target and Walmart and handled operations for more than 5 years. She loves to write about detailed product reviews.

Leave a Reply

Your email address will not be published. Required fields are marked *